DPCAV
900MHZ PATCH ANTENNA, +8DBI GAIN
| < 1.5 | 1 avg. |
| Data Sheet | Click Me! |
Model:, ,
This compact patch antenna is ideal for 900MHz RF applications. ...DPCAV
1280MHZ BLUEBEAM ANTENNA SYSTEM, RHCP
| Center Frequency | 1280MHz, < 1.5 VSWR typical |
| RF Bandwidth | 180MHz (1180MHz-1360MHz, <2.0 VSWR) |
| Gain, 3-lobe | ~1.2dBiC |
| Gain, 4-lobe | ~0.9dBiC |
| Beamwidth | 360° omni |
| Polarization | RHCP |
| Multipath rejection | ~9db typical |
| RF connector | SMA Plug |
| Height | 2.8 inch |
| Width | 4.8 inch |
| Weight | 16g each |
| REFERENCE PLOTS | ANTENNA RF PATTERNS |
This 1280MHz antenna system contains TWO antennas:, One for the transmitter and one for the receiver., Manufacture:, Aerial Video Systems, Important: To ensure RF performance do NOT add paint or coat the element lobes (leave the factory applied finish as-is). The elements should not be allowed to rest against any structures. Do not bend or deform the elements., NOTE: We offer very low-loss extension cables that are specifically designed for the BlueBeam antenna system. Some FPV model installations may need an extension to ensure the antenna is away from nearby surfaces.,
The 1280MHz Bluebeam antenna system is circularly polarized (RHCP) and ...DPCAV
1080MHZ - 1200MHZ PATCH ANTENNA, +8DBI (L-COM RE1208P)
| < 1.5 | 1 avg. |
| Data Sheet | Click Me! |
Model:, ,
This compact patch antenna is ideal for 1.08GHz to 1.20GHz ...DPCAV
900MHZ A/V TRANSMITTER, 1000MW
| USA model has one RF channel | 910MHz (FCC imposed restriction). |
| USA Model Instruction Manual | Click Me! |
| Non-USA Instruction Manual | Click Me! |
Non-USA model has four RF channels:, 910MHz, 980MHz, 1010MHz, 1040MHz, Important note: The DC input connector is a 2.1mm barrel style connector that is center (+) positive. Reversed voltages will damage the receiver., Notice: Due to its high RF power, using the TX9-1000 in the USA and other countries will require an amateur/ham radio license (some countries may forbid its use). It is your responsibility to ensure that its use meets the requirements imposed by your government’s RF spectrum regulations. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them., We offer 900MHz A/V receivers that work great with this transmitter. So if you don't already have a compatible receiver then be sure to check them out:click here,
This 900MHz / 1 Watt (1000mW) wireless A/V transmitter is ...DPCAV
DIGITAL OSCILLOSCOPE, 1MHZ
| Note | This is the improved hardware model and it is FACTORY ASSEMBLED (it is not a kit). |
| Source Coupling | DC/AC. |
| Storage Mode | Hold/run, BMP export. |
| Sample Waveform | Click Me! |
| 500Hz test signal | Click Me! |
| Frequency Measurement | Click Me! |
| Sawtooth Waveform | Click Me! |
| FFT 100KHz Measurement | Click Me! |
| FFT Demo Video | Click Me! |
| Instruction Manual | Click Me! |
| Manufacture's Web Site | Click Me! |
New and Improved Digital Oscilloscope:, Now with higher accuracy, FFT frequency domain display, external trigger I/O, and many other new features. It has 1MHz analog bandwidth, up to 2MSa/s real-time sampling, and digital storage for freezing waveforms. This has to be the best value Digital Oscilloscope on the planet!, Features:, Max sample rate - 2M/s，8 bits., Related photos:, , Useful Links:,
Included is a universal 100-240VAC 50/60Hz wall adapter with North ...DPCAV
WIRELESS VIDEO TRANSMITTER & OSD, FPV DEAL
| Item A | EagleTree eLogger V4 with 100 Amp sensor. |
| Item B | USB cable for eLogger firmware updates. |
| Item C | Eagle Tree OSD Pro Video Expander module. |
| Item D | GPS extension cable for kits shipped before June-2010. |
| Item E | eLogger GPS-V4 Expander module. |
| Item F | Eagle Tree OSD Pro cable Kit. |
| Item H | DPC-420A 420 line CCD color camera. |
| Item I | DPC-420A/480A camera interconnect cable. |
| Item J | TX9-500 900MHz / 500mW transmitter. |
| Item K | Dipole Antenna, +3dBi omni-directional. |
| Item L | Deluxe A/V cable for TX9-500 transmitter. |
| Item M | Male-male video adapter cable, |
This wireless OSD system will transmit graphic data and voice announcements that report a variety of alarms and data, including: voltage, current, mAH, Watts, Home Arrow, Return to Home (RTH / RTL), RADAR, altitude, course (travel direction), ground speed, longitude, latitude, and navigation waypoints. You can expand this system even further by using the low cost eLogger accessories, such as these:Click Me!, Here's a screen shot that shows some of the information that can be shown (temperature and RPM data requires optional accessories):, , All the data parameters that are supported by the eLogger can be displayed on the video display. Here are some examples:, , Notice: Due to the 900MHz transmitter's high RF power, using it in the USA and other countries will require an amateur/ham radio license (some countries may forbid its use). It is your responsibility to ensure that its use meets the requirements of your government’s RF spectrum regulations. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them., . We have other battery choices so that you can select the best one for your application. More choices:Click Me, (3) The 900MHz A/V receiver is not included, but we offer fully compatible models that work great with this special package. Please look here to purchase them:click here, The video format is available in NTSC or PAL. If you are unsure which to choose then please consult this list:TV Video Standards., ,
Ok, so you've decided that you need the EagleTree OSD ...DPCAV
PITOT TUBE KIT V3
,
Brass 2-port Pitot (Prandtl) Tube for the eLogger AirSpeed Microsensor ...DPCAV
GUARDIAN STABILIZER (FOR OSD-PRO)
| Instruction Manual | Click Me! |
| Manufacturer's Web Sitel | Click Me! |
DPCAV
ELOGGER VIDEO OSD-PRO EXPANDER MODULE
| Video Compatibility | NTSC / PAL. |
| Power | Provided by eLogger V3 (sold separately). |
| Video I/O | Two 3-Pin headers. |
| Audio I/O | Two 3-Pin headers. |
| Size | 2.4 x 1.0 inches (61 x 25 mm). |
| Weight | 0.5 ounces (13.5 grams). |
| Instruction Manual | Click Me! |
| Eagle Tree Web Site | Click Me! |
The OSD Pro is a powerful, modular, and fully configurable video/audio On-Screen Display (OSD) device. It provides graphics and voice announcements that report a variety of alarms and data, including: acoustic variometer, electrical performance, Home Arrow, Return to Home, Failsafe, “RADAR”, waypoints, and many other features., how YOU configure the display. Here's a screen shot that shows some of the information that can be shown:, , All the data parameters that are supported by the eLogger can be displayed on the video display. Here are some examples:, , Specification Summary:, IMPORTANT NOTE: The OSD-Pro requires the EagleTree eLogger V3 or V4 module. To display navigation related data the GPS expander module is needed. These items are available separately (please see the related items links shown near the bottom of the page).,
The Eagle Tree Video OSD Pro Expander module adds graphical ...DPCAV
ELOGGER POWERPANEL LCD DISPLAY EXPANDER
New Feature:, The PowerPanel LCD is normally connected to the eLogger module. But when one is connected to the “Exp” port of the, Features (eLogger Installations):, • Ultra-thin LCD display., Features (EagleEyes Installations):, • Easily mounted on the EagleEyes plastic case., Instructions, eLogger & Power Panel:, Click Me!, Instructions, Power Panel only:, Click Me!,
The eLogger PowerPanel LCD Display Expander provides real-time data in ...DPCAV
ELOGGER V4 WITH WIRE LEADS, 150 AMP SENSOR
| Instruction Manual | Click Me! |
| Manufacture's Web Site | Click Me! |
Specifications:, Logs battery current to +/- 150 Amps, .035A resolution.,
Whether you’re into robotics, R/C models or Ham radio ATV, ...DPCAV
ELOGGER V4 WITH WIRE LEADS, 100 AMP SENSOR
| Instruction Manual | Click Me! |
| Manufacture's Web Site | Click Me! |
Specifications:, Logs battery current to +/- 100 Amps, .02A resolution.,
Whether you’re into robotics, R/C models or Ham radio ATV, ...DPCAV
ELOGGER V4 WITH CONNECTORS, 100 AMP SENSOR
| Instruction Manual | Click Me! |
| Manufacturer's Web Site | Click Me! |
Specifications:, Logs battery current to +/- 100 Amps, .02A resolution.,
Whether you’re into robotics, R/C models or Ham radio ATV, ...DPCAV
EAGLETREE OSD-PRO FPV SYSTEM, 3-PIECE KIT
As shown in the photo, the kit provides the following Eagle Tree components:, , This OSD will provide graphic data (and voice announcements) that report a variety of alarms and data, including: voltage, current, mAH, Watts, Home Arrow, Return to Home (RTH / RTL), RADAR, altitude, course (travel direction), ground speed, longitude, latitude, and navigation waypoints. You can expand the reported telemetry information even further by using low cost eLogger accessories, such as these:Click Me!, Here's a screen shot that shows some of the information that can be shown (temperature and RPM data requires optional accessories):, , All the data parameters that are supported by the eLogger can be displayed on your existing video display. Here are some examples:, , Here's some useful links to the manufacturer's web site:, Click Me,
We take the guesswork out of purchasing an OSD telemetry ...DPCAV
MOUNTING U-BRACKET FOR CCD CAMERAS
To help out, here is a chart that lists the bracket size for DPC series and other popular metal cased board cameras:,
Replacement camera mounting U-brackets are available here. There are two ...